HTK
INSTALLATION MANUAL
5
Introduction
Introduction
PLEASE READ THIS MANUAL IN ITS ENTIRETY
PRIOR TO INSTALLATION.
A minimum of two (2) people should be present for installation to minimize risk of injury due to the weight and
size of HTK.
Hamilton is not responsible for any injury caused due to improper installation.
About This Manual
This manual was written to provide general information and guidance for the installation of an HTK pay
station. If you require additional assistance from the manufacturer, you may call
(419) 867-4852
, or email
.
When requesting assistance, ensure you have serial numbers readily available. We recommend recording
these numbers in the spaces below for easy future reference:
HTK MODEL & SERIAL #____________________________________________________________
CONTROLLER MODEL & SERIAL #____________________________________________________
HOPPER 1 MODEL & SERIAL #_______________________________________________________
HOPPER 2 MODEL & SERIAL #_______________________________________________________
STACKER MODEL & SERIAL #________________________________________________________
VALIDATOR SERIAL #_______________________________________________________________
BILL DISPENSER SERIAL #__________________________________________________________
LOCK/KEY # _______________________________________________________________________
Warranty Card
A warranty card is included in the documentation provided with HTK. Complete and return this card to
Hamilton within ten (10) days of installation.
Dedicated Power Source
Before installation,
ensure that HTK has its own dedicated power source
. Under no circumstances should
additional equipment be operating off the dedicated power source for HTK. If a dedicated power source is
unavailable, cease installation until one is established.