3
Connecting the Power
Before connecting the unit to an AC Outlet, check that the operating VOLTAGE of the unit is identical with the
VOLTAGE of your Local Power Supply.
Connect the supplied AC Power Cord to the AC Socket at the back of unit.
When the AC Power Cord is plugged into the Batteries are automatically disconnected.
AC POWER OPERATION
The unit cannot be operated by battery when the AC power cord is connected.
Open the battery cover and put the batteries as indicated inside the battery compartment.
BATTERY OPERATION
Follow these precautions when using batteries in this device:
1.
2.
3.
4.
5.
Use only the size and type of batteries specified.
1.
2.
3.
Note:
Remove the battery compartment cover on the back of
the remote control, by pushing the tab to the right while
removing the cover.
Insert a 3V lithium battery (CR2025 or equivalent)
following the polarity (+) as shown on the diagram inside the compartment.
Replace the battery compartment cover.
Be sure to follow the correct polarity when installing the batteries as indicated in the batteries
compartment.
Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer's directions)
BATTERY PRECAUTIONS
INSTALLING THE REMOTE CONTROL BATTERY
1.
2.
3.
4.
CAUTION
: Danger of explosion if battery is not inserted correctly. Replace only with the same or
equivalent type.
Do not mix different types of battery together (e.g. alkaline, rechargeable and standard (carbon zinc) or
old batteries with fresh ones.
Exhausted batteries must be removed to prevent possible leakage.
Dispose of batteries properly in accordance with the environmental regulations in force.
PRECAUTIONS WHEN USING BATTERIES
The remote control battery normally lasts for about one year, although it depends on how often the
remote control is used.
If the remote control is not working properly, replace the battery.
CR2025
PUSH
OPEN
8
Headphone
Turn the unit volume to minimum before you connect your headphone to headphone jack. Headphones
should have a 3.5 mm diameter stereo plug and an impedance of 8-32 ohms. When headphones are
connected, the speakers automatically get disconnected.
NOTE:
Extended listening of music at high volume may damage your hearing. It is highly
recommended to use at comfortable volume levels.
AUX-IN
1. Press the POWER switch.
2. Rotate the FUNCTION switch to AUX-IN position.
3. Connect your MP3 player or any of your audio devices to "AUX-IN" jack by using the "AUX IN" cable
(not included).
4. Switch on and play-back your connecting MP3 player or other audio devices
5. The unit will play automatically.
6. Adjust the volume control to get your favorable sound level.
7. To stop playing, simply plug out the "AUX IN" cable.
Audio Out
Connect the AUDIO OUT Left and Right jacks to an external amplifier to get a better louder sound.
Sing Along System
This unit has microphone jack which allow you to sing along with your favourite songs. Before
connecting, make sure the MIC VOLUME control are set to minimum. Slide the ON/OFF switch on the
microphone to the ON position when using. (Microphone not included)
BALANCE CONTROL
Rotate the BALANCE CONTROL to select the SOUND FROM left or right SPEAKER.
