2
Universal Induction Wireless Speaker
1. INTRODUCTION
The speaker uses Interaction technology. Simply place a mobile device such as an iPhone on top of the
speaker and the sound from the internal speaker is magically amplified.
This product is compatible with iPhone , iPod touch 4, and most of other devices with an external speaker.
2. FEATURES
*Magically amplifies the sound from your mobile phone.
*No configuration such as paring is needed.
*Automatically turns on and off.
*Supported by most iOS devices and Andriod phones.
*Powerful output of 2W x 2RMS.
*High efficiency - 15 hours play time * for AA A line batteries x 3.
*Battery low indication.
*Includes Audio in (3.5mm) and DC in (Micro. USB) sockets.
*Average volume levels.
3.USER INTERFACE
4 OPERATION
4.1 Interaction TM Wireless Operation
IOS DEVICES:
When in Standby or Power On Modes, placing an iPhone™ iPod™, or other device, with the external sound or
music being played in the correct direction activates the speaker. Example-align the bottom of the
iphone™/iPod™ to the front of the speaker.
Android and other Devices:
Different audio devices require different positioning.
Experiment with the placement of the device until the device and speaker sensors are in alignment.
4.2 Volume Control
To adjust the volume simply change the volume level on your mobile device and the automatically adjusts the
outout volume.
4.3 Audio in operation
The 3.5mm jack is for optional wired audio input for most mobile devices, the bass performance is better when
using line-in.
Blue LED
Power Button
Micro USB DC in
Audio in
5 Power
The speaker can be powered by three AA batteries or external DC in from the Micro USB socket.
When the batteries are first inserted, the speaker will stay in standby mode.
5.1.Power Status
Every time the Power Button is pressed, the power status advances one step in a cycle as follows: Off-
Standby-on-Off...
The power Status is indicated by the Blue LED:
Status: Blue LED
Power On
Power Off
Stand by
Music Playing
Battery Low
Blue LED
Lights up
Off
Flashes once every 3 seconds (approx).
Synchronized with the music
Falshes 3 times every 4 seconds (approx).
5. 2.Automatic Power on/off:
When the speaker is in Standby mode, if music is played while the device is placed on top of the unit in the c
The speaker will return to Standby mode 1 minute after the music has stopped.
when using Alkaline batteries, the speaker can stay in Standby mode for over 6 minutes. When the speaker is i
5.3 Battery Low Indication
The Blue LED flashes 3 times every 4 seconds to indicate the battery low status.
This happens only in Standby Mode. Please note that when the batteries are relatively low, the sound
When the batteries are too low, the system will cut off power to prevent the batteries from being damaged.
5.4 External DC 5V in:
The micro USB socket is for external power of DC 5V. When the external power is plugged in, the AA batterie
speaker will turn on automatically
.
orrect position, the
will switch automatically to Power Off 10 minutes after the music has stopped.
n Power On mode, it
may be distorted when playing in high volume.
s will not be used.
