5
14
Charging the Lithium Battery
1. Make sure the battery is fully charged before use.
2. To charge the battery, connect it to your PC with the USB cable.
3. While charging, the LED (green) indicator light will be illuminated. When fully charged, the LED
light will turn off.
Load SD card
Load the SD card into the card slot next to the battery compartment. To install:
1. Open the battery cover and locate the SD card slot.
2. Load the SD card correctly as shown in the picture.
3. When you hear a “click” it means the memory card is installed correctly.
An icon of the SD card will appear on the LCD screen.
4. Before installation, make sure that the SD card is not locked.
If the SD card is locked, the pictures will not be saved.
5. Supports up to 32GB.
Note:
1. Formatting will erase all data including protected data in the SD card.
2. Please do not remove the SD card while the card is being formatted to avoid any file damages.
1. Video files played
Press left/right button to choose any video file or Press the W button to enter the thumbnail mode.
Press the arrow buttons to select a video file.
Press the SHUTTER button to play the video files.
Press the SHUTTER button to pause the video files.
Press the UP button to completely exit out of the video file that is being played.
2. Thumbnail
This function enables you to display stored videos and photos in 3 x 3 thumbnails.
Press the W button and then press arrow button to choose the photos or videos, press menu button to
display full-screen of the video or photo.
3. Zoom in or zoom out photos (8X)
Select any stored photos in the memory card. Press the T or W button to zoom in and out of the
selected photo. When the T or W button is pressed, the zoom icon will appear on the LCD screen.
4. Different functions in the playback mode
Different menus can be accessed by selecting the following functions:
1. Press menu button to enter into menu interface
2. Press arrow buttons to choose the icon that you would like to select
3. Press to confirm, save and exit