ALSM700 TRANSMITTER
POWERING THE TRANSMITTER
NOTE:
Only use the supplied power adapter.
1. Insert the smaller end of the plug of the adapter to the back of the transmitter.
Please ensure the power switch is on OFF prior to inserting the plug.
2. Plug the large end of the adapter into an AC wall socket.
See diagram below for reference.
3. Turn on the Power by pressing the
POWER SWITCH
. Once turned on, the power
indicator will illuminate.
4. The transmitter “signal” indicator will illuminate to confirm that the transmitter is
broadcasting.
5. Press the
CHANNEL
button on the front panel to select your desired channel.
SETTING UP THE TRANSMITTER
MICROPHONE INPUT
the 1/4”
MIC IN
jack on the back of the transmitter is designed
to accept either dynamic or electret microphones (microphone not included)
The 1/4”
LINE IN
jack enables you to connect directly to any audio source (Cable not
included).
See below diagram for reference.