9
SETTING
IRONING INSTRUCTIONS
Dry iron on the wrong side of the fabric.
Dry iron; use spray if necessary.
Dry iron; use spray if necessary.
Iron on the wrong side of the fabric.
Use a pressing cloth and steam iron on the
wrong side of the fabric.
Iron while fabric is still damp.
Iron on the wrong side of the fabric.
Iron while still damp using steam and spray
if necessary.
Iron while still damp on the wrong side
of the fabric.
0
1
2
3
4
5
6
7
8
9
Dry Iron
TO IRON
Off/Clean
Acetate
Nylon
Acrylic
Silk
Wool
Polyester
Rayon
Cotton
Linen
Steam Range
NOTE:
To dry iron on settings 4-9, empty all water from the tank.
Temperature Control Dial and
Fabric/Setting Chart
store the cord as described in the
“Retractable Cord” section. Never
store iron sitting flat on the soleplate.
This would damage the inside of the
soleplate. Always store iron on its heel
in upright position.
5.
Wrap cord loosely around cord wrap
and set on heel. If
you have the
retractable cord
feature, use the
reel to wind and
Ironing Tips
• Always check the fabric content
before beginning to iron. If the fabric
is a blend, use the lower temperature
setting.
• If the fabric content is unknown, use
the lowest temperature setting and
test on an inside seam of the garment.
• If ironing several items, start ironing
the items which need the lowest
temperature setting first. An iron heats
up much faster than it cools down.
• To maintain the quality of the
soleplate, never iron over zippers,
pins, buttons or anything metal.
• Use caution when ironing around
plastic buttons and zippers as these
may melt.
• To iron fabrics stating “Dry Clean
Only,” first clean as directed before
ironing. Use caution and begin
ironing on the lowest setting, testing
on an inside seam allowance of
the garment.
