Hamilton Beach HIR700-CE, Operation Manual

Page: 3 / 69

1. Set the Adjustable Steam Switch to (Dry Iron).
2. Unplug iron.
3. Pour 120 ml of ordinary tap water into water tank
opening.
4. Plug iron into outlet.
5. Turn Temperature Control Dial to desired fabric setting
in the steam range. Allow 2 minutes for iron to reach
desired temperature.
WARNING! Burn Hazard: Attempting to steam iron on
a lower temperature setting or failing to allow the iron to
preheat for 2 minutes can result in hot water dripping
from the soleplate.
6. Set Adjustable Steam Switch to the desired steam level.
7. For vertical steaming, hold iron 6 inches (15 cm) from
garment and do not allow hot soleplate to touch delicate
garments. Press and release the Steam Burst Button to
steam out wrinkles. Wait at least 5 seconds before
pressing Steam Burst Button again.
8. To turn iron off, set Adjustable Steam Switch to (Dry
Iron).
9. Turn the Temperature Control Dial to OFF.
10. Unplug iron.
How to Steam Iron
1. Plug iron into outlet.
2. Set the Adjustable Steam Switch to (Dry Iron).
3. Turn Temperature Control Dial to desired temperature.
Allow 2 minutes for iron to reach desired temperature.
4. To turn iron off, turn Temperature Control Dial to OFF.
5. Unplug iron.
How to Dry Iron
The iron will turn off automatically when left stationary for 30
seconds (15 minutes on heel). Moving the iron will reset the
sensor.
Position-Sensing Auto Shutoff
4 5
840208803 GBv01.qxd:840145300 Ev00.qxd 1/30/12 10:40 AM Page 4