3
10.
Do not let cord hang over edge of table or
counter or touch hot surfaces, including stove.
11.
Do not place on or near a hot gas or electric
burner, or in a heated oven.
12.
Blades are sharp; handle carefully—especially
when assembling, disassembling, or cleaning
inside blender jar.
13.
Do not use a broken, chipped, or cracked blender
jar.
14.
To reduce the risk of injury, never place cutting
blade assembly on base without jar properly
attached.
15.
Do not blend hot liquids in the personal jar.
16.
Do not use broken, cracked, or loose cutting
blade assembly.
17.
Always operate blender with lid in place.
18.
Be careful if hot liquid is poured into blender as
it can be ejected out of appliance due to sudden
steaming.
19.
When blending hot liquids, open the center vent
lid and close any edge cover opening intended
for pouring. To prevent possible burns: Do not
exceed the 3-cup (710-ml) level. Hot liquids may
push off lid during blending; start blending at
lowest speed.
20.
Ensure collar on base of blending jar and
personal jar are tight and secure. Injury can result
if moving blades accidentally become exposed.
21.
If the jar should twist or rotate when the motor
is switched ON, switch OFF ( ) immediately and
tighten jar in collar.
22.
Do not leave blender unattended while it is
operating.
23.
To disconnect cord, switch to OFF ( ). Then
remove plug from wall socket.
24.
Do not use appliance for other than intended
purpose.
Summary of Contents for 53602-CN
Page 28: ...28 注意 ...
Page 29: ...29 注意 ...
