Hamilton Beach 52400-SAU, Operation Manual

Page: 5 / 72

5
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled
in order to reduce any impact to the environment. The user is responsible for returning the product
to the appropriate collection facility, as specified by your local code. For additional information
regarding applicable local laws, please contact the municipal facility and/or local distributor.
SAVE THESE INSTRUCTIONS
Other Consumer Safety Information
This appliance is intended to be used in household and similar
applications such as:
– staff kitchen areas in shops, offices, and other working
environments;
– farm houses;
– by clients in hotels, motels, and other residential-type
environments;
– bed and breakfast-type environments.
The appliance is not intended for commercial, professional, or
industrial use.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in or tripping over a
longer cord. If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the extension cord
must be equal to or greater than the rating of the appliance. Care
must be taken to arrange the extension cord so that it will not
drape over the countertop or tabletop where it can be pulled on
by children or accidentally tripped over.
If the cutting blade assembly locks and will not move, it will
damage the motor. Do not use. Call the toll-free customer service
number for information.
Do not place blending jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.
BEFORE FIRST USE: After unpacking blender, wash everything
except blender base in hot, soapy water. Dry thoroughly. Wipe
blender base with a damp cloth or sponge. DO NOT IMMERSE
BASE IN WATER. Care should be taken when handling cutting
blade assembly as it is very sharp.