5
How to Use Single-Serve Side –
Brewing K-Cup
®
* Packs
1
Plug in coffeemaker. Rotate brew
selector dial to the right to select
Single-Serve ( ). Press
BREW
OPTIONS
button to select .
Burn Hazard.
To avoid contact with hot coffee or water:
• Do not use more than 10 oz. (300 ml) of water for K-Cup
®
* pack. Adding too much water to the water reservoir will cause an error message
to appear in the display, along with a long beep. Place carafe on warming plate. Turn brew selector dial to Carafe ( ) and push
BREW NOW
button to remove water. Wait for 3 beeps and blue power light to turn off. Restart the Single-Serve process.
• Fill reservoir with cup or travel mug of water into which the coffee will be brewed.
• Fully insert cup or travel mug under brew basket.
• For best results, use K-Cup
®
* packs sold by Green Mountain Coffee
®
‡
.
NOTES:
• The unit will only brew on one
side at a time.
• For Hotter Coffee: Rinse the
mug with hot water before
brewing.
• The Brew Mode selection will
stay in the last mode used,
unless unplugged.
• Coffee may continue to drip
after brewing is complete (after
3 beeps) when using finely
ground coffee.
• Programming mode cannot be
used on Single-Serve side.
w
WARNING
‡
Green Mountain Coffee is a trademark of Green Mountain Coffee Roasters, Inc. Use of the Green Mountain Coffee trademark
does not imply any affiliation with or endorsement by Green Mountain Coffee Roasters, Inc.
2
Remove brew basket. Place
a pack into the K-Cup
®
* pack
holder.
CAUTION!
Cut Hazard: K-Cup
®
*
pack holder has a sharp blade.
Handle with care.
3
Press down on edge of the pack
until the pack snaps into place and
hole is punched in the bottom. Do
not remove foil.
840219700 ENv10.indd 5
840219700 ENv10.indd 5
4/22/13 2:18 PM
4/22/13 2:18 PM
