Hamilton Beach Professional 70825-SAU Manual Download Page 23

 

23

Troubleshooting

PROBLEM

PROBABLE CAUSE/SOLUTION

Unit does not operate  

on any speed or Pulse.

• Is the unit plugged in? Does the outlet work?

• Is the lid latched in place? See “How to Use” sections. Place lid on work bowl, making sure to align the 

pour spout on the lid with the pour spout on the work bowl.

• Is the large food pusher in the chute? The large food pusher must be in place to operate.

• Is the food chute overfilled? Do not add food above the MAX fill line. The large food pusher must be in the 

food chute to operate.

Food is not sliced or  

shredded uniformly.

• Packing too much food in the food chute or pushing too hard on the food pusher may cause the 

processed food to be irregulary sliced or shredded. Refer to the Food Processing Charts for recommended 

sizes and quantities. 

• When processing tall, thin vegetables, use the small or medium chute to keep food in the upright position.

Unit stops and will  

not come back on.

• Is the lid latched in place? See “How to Use” sections. Place lid on work bowl, making sure to align the 

pour spout on the lid with the pour spout on the work bowl. 

• Unit has a thermal reset device, as indicated on the power cord. 

• Is the outlet still working? Check it by plugging in a working lamp or other appliance. You may have 

overloaded the circuit and blown a fuse or tripped the circuit breaker.

• Press STOP ( ), unplug, allow to stand for 15 minutes, and then turn back on. 

• If none of these suggestions correct the problem, DO NOT attempt to repair the unit. Call the Customer 

Service number.

Unit has a burning smell.

• There may be a residue left on the motor from the manufacturing process, causing a slight odor during 

initial use. This will go away. If a strong odor or any visible smoke appears, unplug unit IMMEDIATELY and 

call the Customer Service number.

Motor seems weak.

• Are you using the recommended food size and quantity to be processed? Refer to the Food Processing 

Charts for recommended food sizes and speeds.

Cheese is not shredding well. • Cheese should be processed immediately after being removed from the refrigerator. Soft cheese like 

mozzarella should be placed in the freezer for 30 minutes prior to processing to ensure it is firm enough 

for shredding.

Vegetables are not  

shredding or slicing.

• Store vegetables with high water content in the refrigerator prior to processing. Room-temperature 

vegetables are less firm and do not perform as well.

Food particles stuck in the 

back of the food chute.

• Place back of the food chute under running water to rinse out the food before placing in the dishwasher.

Summary of Contents for 70825-SAU

















































Reviews: