Hamilton Beach Professional 58912-SAU, Operation Manual

Page: 7 / 84

7
Parts and Features
(cont.)
RESET/OFF ( I / ) (Power) Switch/Circuit Breaker:
The RESET/OFF ( I / ) (Power) Switch is located on the right-hand side of
the Blender Base. This Switch controls power to the Blender. This Switch
is also a circuit breaker that, if tripped, must be turned off and back on to
reset.
Control Panel
Emulsion Cup: The Emulsion Cup helps create dressings and sauces that require slowly
adding liquid ingredients into the Jar while the Blender is in operation.
Lid: The Lid is easy to put on, take off, and clean. Always use the Lid and the Emulsion
Cup when the machine is in operation.
Blender Jar: Volume measures are clearly marked.
Tamper: The Tamper helps mix thick or frozen recipes that cannot be processed with
regular blending. It prevents air pockets from forming and is a handy tool when making
nut butters or frozen desserts.
Automatic Overload Protection:
This machine is equipped with motor overload protection. If the motor stops during
operation due to overheating, unplug and allow it to cool down for approximately
15 minutes. Plug machine back in to resume normal operation.
PULSE ( ) Switch:
Press and hold down the PULSE ( ) Switch to blend at the speed setting
shown on the Variable Speed Dial in MANUAL mode.
Variable Speed Dial:
The center Variable Speed Dial determines
the Blender speed setting when blending in
MANUAL mode.
Program Buttons:
There are four program settings: HOT SOUP ( ), SMOOTHIE
( ), ICE CRUSH ( ), and WHOLE JUICE ( ). Select the
desired program by pressing the button for that program.
START/STOP ( ) Switch:
The START/STOP ( ) Switch is used to begin or end the MANUAL
mode or to stop a program before the cycle ends.