background image

4

Sanitizing

Sanitize using 15 ml (1 Tablespoon) of household 

bleach per 3.8 liters (1 gallon) of clean, cool water 

(16°C/60°F), mixed according to the instructions  

on the bleach.
1.  Fill jar to maximum fill line with sanitizing 

solution, replace lid and filler cap or dosing cup 

and run on low speed for 2 minutes. Empty jar.

2.  Wipe exterior with soft cloth dampened with 

sanitizing solution.

3.  Immerse lid and filler cap or dosing cup in 

sanitizing solution for 2 minutes.

4.  Place empty jar on base and run on high speed 

for 2 seconds to remove any moisture from the 

cutter assembly.

5.  When ready to use, rinse with clean water.

w

 WARNING

Electrical Shock Hazard

Disconnect power before 

cleaning blender base.
Failure to follow these 

instructions can result in  

death or electrical shock.

w

 WARNING

Electrical Shock Hazard

Plug into a grounded socket. 
Do not remove ground. 
Do not use an adapter. 
Do not use an extension cord. 
Failure to follow these instructions can 

result in death, fire, or electrical shock. 

w

 WARNING

Cut Hazard

Always place cover on blending jar when 

blending. 
Do not put hands, spoons, or other utensils 

in blending jar when blending. 
Failure to follow these instructions can 

result in broken bones, cuts, or other 

injuries.

Technical Services

For assistance or replacement parts, call or email Technical Services: 

USA, Canada: 866-285-1087 or +1-910-693-4277, 

[email protected] 

Mexico: 800 71 16 100, [email protected]

APAC Region: +86-400-930-2722, [email protected]

www.hamiltonbeachcommercial.com

w

 CAUTION

Burn Hazard

Always use caution when blending 

hot contents.
Failure to follow these instructions can 

result in burns.

Safety Alert Symbols
The following safety alert symbols are used throughout this manual to alert you to the safety hazards 

described below.

WARNING indicates a hazardous situation which, if 

not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, 

if not avoided, could result in minor or moderate 

injury.

Your safety and the safety of oth ers is very important.

We have provided many important safety messages in this manual and on your appliance.  

Always read and obey all safety messages.

This is the safety alert symbol. It is used to alert you to potential physical injury hazards. 

Obey all safety messages that follow this symbol to avoid possible injury or death.
All safety messages will be preceded by the safety alert symbol and the word “WARNING”  

or “CAUTION.” These words mean:

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what 

can happen if the instructions are not followed.

w

WARNING

w

CAUTION

840337400 v13.indd   4

7/29/20   11:06 AM

Summary of Contents for HBH350 Series

















Reviews: