The power lead supplied is a standard IEC connector terminated with a German ‘Schuko’
plug.
Be sure that the ‘on/off’ switch is in the ‘off’ position before connecting the power cable.
The instrument is suitable to be used in most countries of the world accepting voltages
between 100 to 240 AC. But please ask your dealer for using in your country, and please
be sure that your personal AC supply is suitable with the instrument requirements.
CONNECTION OF THE ORGAN
Please remember that we HIGHLY suggest the use of the Hamichord swell pedal. We
cannot guarantee that every pedal on the market is suitable for use with your organ:
Before connecting another kind of pedal, please be sure that it is electrically compliant.
BG’s srl is not responsible for any damage that may happen to the instrument due to the
use of an incompatible swell pedal or volume pedal!
POSITIONING
The optimal support for the instrument is the original Hamichord stand, however, you can
use alternative supports if they are suitable for the weight of the organ.
CONNECTIONS AND CONTROLS
Back panel connections:
•
AC Plug in (from 100 to 240 V)
•
Button On/I – Off/0
•
Rotator EXT-INT: With this selector you can choose between the internal rotary
simulator and switching to an external rotary speaker. When the selector is in
“internal” position, the front switch will use the internal rotary simulator. When the
selector is in “external” position, the internal simulation is turned off and the front
switch will switch speeds on your external rotary speaker connected via the 11 pin
connector (if connected to exp-edition).
4)CONNECTIONS, CONTROLS AND POSITIONING.