Ultra PicoKeyer
27 January 2017 (Firmware V2.2)
Page 10 of 21
used the menu for a while. Once you have MENU selected, tap ▼ or ▲ to switch between “L” (long” and “S”
(short) modes.
As an example, let’s look at the S menu item (SPEED setting). Once in setup mode, tap button 4 to advance to the
“SPEED” menu item. The keyer will announce the currently set speed. You can now tap button 2 to decrease the
speed by one WPM, or button 3 to increase it. Holding either button will continuously increase or decrease the
speed, with a dot or dash sent at the new speed for each step. When the button is released, the keyer will again
announce the current speed setting. Speed may be set from 5 WPM to 60 WPM. If you want to return to the
default 13 WPM setting, simply press and release buttons 2 and 3 at the same time.
