Hame 434T, User Manual

Page: 20 / 37

5.1.2 LAN

IP address
: Set up IP addresses for Intranet ports

Subnet mask
: Set up masks for the Intranet.

MAC address
: Indicated physical addresses of the Intranet ports.

DHCP type
: Select “Server” to open DHCP services and then the host in the Intranet
could obtain IPs dynamically.

Start IP address-End IP address
: IPs obtained by the host in the Intranet via DHCP
mode is included in this range.
5.1.3 Static Routing
This function may be used when it is required to add a specific routing for a certain host.
The proper use of static routing could reduce routing issues, alleviate the overload of routing
data flows and enhance the transmission speed for the data packets. A routing item may be
identified by setting targeted IP address, subnet mask and gateway address, among which
the targeted IP address and the subnet mask are used to identify a target network/host.
Afterwards, the router transmits the data packets to the designated target network/host via
the gateway.
20