1c
1f
EN
Tighten the rear bolt (1f) first, with the seat still on the
carrier adapter. Remove the seat and tighten the front clamps.
Minimal tightening torque is 2 Nm.
Make sure that the clamps have a good grip on the carrier and
are not blocked by the frame or the E-bike battery (1c).
E
Fix the adapter on the luggage carrier
3
4
2
1
Set the seat down on the adapter. Close the 2 side levers (2) or insert
and lock the excentric shaft (3) to make the rear connection. The
hooks of Caress will lock automatically when the seat is pushed
down. When the system is closed, the release button (4) will stick out
at the back.
Check if the seat is firmly attached to the adapter.
EN
Position the seat (1) and adapter as much towards the front
as possible while still leaving room for reclining the seat (2) if
needed.
2
C
Lock the seat on the adapter
D
Adjusting the seat
2
