HAMAR LASER L-705, Manual

Page: 22 / 49

19
How to change the L-111 from a Horizontal Surface to a Vertical Surface
The L-111 has two mounting orientations: one for horizontal surfaces (shown left), and one for vertical
surfaces (shown right), such as bore or gearbox flanges.
L-111 with L-706 in Vertical Mount Mode
The following steps allow a user to change the L-111 from Horizontal Mount Mode to Vertical Mount
Mode.
1. Using the provided Allen wrench, remove the
three bolts that hold the L-111 stand to
magnetic base.
L-111 with L-706 in
Vertical Mount Mode
L-111 with L-706 in Horizontal Mount Mode