20
Diagnostic Readout – Debug Mode
In addition to the information displayed in the
Application Mode Readout, the DEBUG Mode
Readout also shows Raw Position Sensor readings,
Power Supply Voltages, Beam-on-Sensor Time and
Incident Noise Characteristics.
1.
Set the target to DEBUG – B Packet Mode (see
Figure 35). The Diagnostic Readout window
displays (see Figure 36).
2.
Click
START POLLING TARGET
(the button
title changes to
STOP POLLING TARGET
).
Figure 36 –
Diagnostic Readout – Debug Mode
Figure 35 –
Non-standard Modes