ORCA-Lightning Digital CMOS Camera C14120-20P Instruction manual_Ver.2.5
44
11-4 OPERATIONS
After setup, operate Water-cooling according to the following.
Handle the application software and peripherals according to each instruction.
↓
Switch on the cooling method by DCAM Configurator
Turn on the camera and the computer
↓
Switch the cooling method
↓
Turn off the camera
↓
Turn on the circulating water cooler
↓
Turn on the computer and peripherals
↓
Make sure “STATUS lamp” and “CoaXPress interface connector lamps” stays on green
↓
Launch the application software
↓
Start Water-cooling
by the application software
↓
Camera setting
*
（
* Set the camera setting when there is necessary for using application software. Refer to Chapter 10.
）
↓
Image acquisition
↓
End of imaging
End of image acquisition and software , Turn off all the power
↓
Turn off the cooler
Summary of Contents for ORCA-Lighting C14120-20P
Page 2: ...Blank page...
