Hamamatsu Photonics ORCA-Lighting C14120-20P, Instruction Manual

Page: 24 / 62

ORCA-Lightning Digital CMOS Camera C14120-20P Instruction manual_Ver.2.5
22
10. CAMERA SETTINGS AND FUNCTIONS
The camera setting and operating is controlled by the connected computer (the application software).
10-1 SETTINGS AND FUNCTIONS
The following are the camera’s settings and functions.
Items Outlines [Default] Refer to
Camera readout modes Choose the readout method of image. [Norma Area Mode] 10-2
Camera operation modes
Choose the synchronization control system of the camera among
an internal synchronization (Free running mode) or an external
synchronization (External trigger mode, Start trigger mode).
[Free running mode]
10-3
Readout methods
Choose the unit of readout pixel. When Sub-array readout is
chosen, the readout area is specified.
[Full resolution readout]
10-4
Exposure time setting
Set the exposure time when the following modes; Free running
mode, Edge trigger mode, Global reset edge trigger mode
[8.2 ms at Free running mode and 12 bit digital output]
10-6
Trigger outputs The camera controls an external device. [OFF] 10-7
Real-time defect pixel correction
The unevenness of the noise of the pixel is leveled in real
time.
[ON]
10-8
High Full Well Capacity mode
The full well capacity is increased, and enable 16 bit digital
output.
[OFF]
10-9
[Relationship diagram]
(Camera readout modes) (Camera operation modes) (External trigger modes)
Normal Area Mode
Free running mode
External trigger mode Edge trigger mode
Start trigger mode Global reset edge trigger mode
Level trigger mode
Global reset level trigger mode
Synchronous readout trigger mode
Lightsheet
Readout Mode
Free running mode
External trigger mode Edge trigger mode
Start trigger mode