background image

< 22 > 

 

Software license agreement 

 
Please carefully read the following conditions (hereafter called, "product license agreement") in this 
document. Hamamatsu Photonics K. K. (hereafter, "Hamamatsu Photonics") grants usage of the 
software such as MPPC Module evaluation software and related DLL files (hereafter called, "this 
software") only to those users accepting the conditions of this product license agreement.   
By installing this software, you agree to be bound by these terms and conditions. If you do not agree to 
these terms or conditions in whole or in part, do not install or use this software. 
 
1.  Objective of this software 

This software is control software provided free of charge and without warranty under this product 
agreement for the convenience of users wishing to use a Hamamatsu Photonics MPPC Module 
(hereafter called, "MPPC Module"). 

 
2.  Granting of usage rights 

Hamamatsu Photonics grants you the right to install this software and control the MPPC Module, 
only when you agree to the terms and conditions of this product license agreement. 

 
3.  Copyrights and other rights 

Intellectual assets and owner rights to this software and accessory documents and all other rights 
are owned by Hamamatsu Photonics. This software is protected by laws and international 
agreements involving intellectual assets such as copyrights. You must not alter or remove any 
copyright markings attached to this software or the accessory documents. 
Other than the terms specifically granted in this product license agreement, Hamamatsu 
Photonics retains all rights relating to this software and accessory documents and does not grant 
or concede rights of any kind to you. 

 
4. Copying 

You are allowed to copy this software for the purpose of making a backup, under the condition 
that you respect and obey all terms and conditions of this product license agreement. 

 
5. Prohibited 

actions 

You must not perform the following actions. However, if you grant, lease or lend the MPPC 
Module to a third party, then when you deliver the MPPC Module along with this software to the 
applicable third party, Hamamatsu Photonics grants use of this software to the applicable third 
party under the continuing product license agreement, when the applicable third party accepts the 
terms and conditions of this product license agreement. 

  Activities such as the sale and distribution of this software to a third party, and or 

advertising, display, use, copying, and sales with the objective of selling and distributing 
this software to a third party. 

  The transfer or re-granting of the usage rights for this software to a third party. 

  The setting as collateral, or lending, leasing of this software to a third party. 

  The altering or eliminating all or a portion of this software, including this product license 

agreement and other accessory documents. 

  The copying, adaptation, translation, reverse engineering, disassembly or decompilation 

or use of other methods for revealing the source code, in whole or in part of this software. 

 
6.  Limits on liability 

Hamamatsu Photonics provides absolutely no assurance of the quality, performance or fitness for 
a particular purpose of this software and accessory documents. Hamamatsu Photonics accepts 
absolutely no liability in any event whatsoever, for computer breakdowns, losses or damage, 
destruction of information, or other losses of any kind arising directly or indirectly from the use or 
inability to use this software and accessory documents. Hamamatsu Photonics offers no 
maintenance or support for this software, and further accepts no responsibility for making repairs 
or restorations even when a problem or obstacle has occurred. 

Summary of Contents for C10507 Series
































Reviews: