Hama USB 2.0 / Fire Wire Combo, Operating Instruction

Page: 5 / 8

6
System requirements:
• Operating system Windows 2000 from SP 3,
XP from SP 1, Vista or Mac™ OS 10.x
• Free USB connection, preferably USB 2.0
Safety instructions:
You have acquired a high-quality, electronic
accessory for your computer which is univer-
sally useable. Please observe the following
points:
• Protect the device against pressure and
impact.
• Do not expose the device to moisture. The
precision contacts can be damaged.
• To not connect the device if the device, the
connection lead or the mains adapter are
damaged.
• The device or other components must only
be repaired in a specialist shop or in a
service
centre.
• Only use the enclosed original mains
adapter or original spare parts.
• Only use the enclosed USB connection
cable without extension. Otherwise, the
data security can be affected.
• Make sure that all connected devices are
CE-marked.
• Avoid heat sources and direct sunlight
exposure.
•
Attention! Keep electrical equipment and
electronic devices out of reach of children.
•
Attention! Keep packaging materials out of
reach of children! Danger of suffocation!
•
Attention! This is an apparatus of the class
A. This apparatus may cause radio
interferences in the living area; in this case,
the operator can be demanded to take
appropriate
measures.
Putting into operation:
1. Switch on your PC and wait until it has
started up. Connect the USB hub with your
PC/notebook by means of the enclosed
USB
cable.
2. Please make sure that no terminal device is
connected when you install the USB hub.
Note: When connecting and disconnecting
the USB hub and the USB devices, different
messages can appear on your screen.
Contact a specialist or consult the manual
of your computer or operating system if
you have any questions.
3. Now you can connect your USB peripheral
devices (e.g. printer, scanner etc.) to the
USB hub. When installing the devices you
have to install every devices separately, i.e.
please wait until the drivers of the respective
device have been completely installed
before installing another device.
4. It is also recommendable – as far as this is
possible
– to supply the terminal devices
which are connected to the hub with power
of their own.
Note: When connecting the USB hub, you
do not have to install drivers (are included
in the operating system Windows 2000 from
SP3, XP from SP1, Vista or Mac OS 10.x).
A driver may be necessary for the
connected USB devices. This one can be
obtained from the manufacturer of the
respective device or when purchasing such
a
device.
g
Operating Instruction