Hama Soundcup-L, Operating Instructions Manual

Page: 6 / 141

5
• Make sure that your
Bluetooth
® capable terminal device is on and
Bluetooth
® is
activated.
• Make sure that the speaker is located within the Bluetooth ® range of max. 10
metres.
• Switch on the speakers as described in 4.1 Switching the product on and off.
• The status LED (4) starts to flash in blue. The speaker searches for a connection.
• Open the Bluetooth
®
settings on your terminal device and wait until Hama
Soundcup-L appears in the list of Bluetooth ® devices found.
• Select Hama Soundcup-L and wait until the speaker is listed as connected in
the Bluetooth
®
settings on your terminal device. An acoustic signal confirms that
connection was successful.
• The status LED (4) now remains blue.
Note – Bluetooth
®
password
• Some terminal devices require a password in order to connect to another
Bluetooth
® device.
• If your terminal device requests a password for connection to the speaker, enter
0000.
Note
• The speaker always stores the last eight terminal devices paired.
• The speaker will automatically connect to the last terminal device paired when it
is switched on the next time.
4.5 Automatic
Bluetooth
® connection (after successful pairing)
• Make sure that your Bluetooth
®
capable terminal device is on and Bluetooth
®
is
activated.
• Make sure that the speaker is located within the
Bluetooth
® range of max. 10
metres.
• Switch on the speakers as described in 4.1 Switching the product on and off.
• After successful connection, the status LED (4) will light up in blue. An acoustic
signal confirms that connection was successful.