3
•
Charge the speaker fully before using it for the first
time.
•
Connect the included Micro-USB charging cable to
the speaker’s Micro-USB port (3).
•
Connect the unused connector on the Micro-USB
charging cable to a suitable USB charger. Please refer
to the operating instructions for the USB charger
used.
Note – Charging
•
It takes approx. 4 – 5 hours to completely charge
the product.
•
The speaker’s battery can be charged whether the
speaker is on or off.
•
If the battery capacity is less than 10%, the
speaker will emit two acoustic signals. You will
only receive this information if the speaker is on.
•
The actual battery life varies depending on use of
the device, the settings and the ambient conditions
(rechargeable batteries have a limited service life).
4.3 Audio playback via the included audio cable
(3.5 mm jack)
•
Ensure that the speaker is switched off.
•
Connect your mobile terminal device (MP3 player,
smartphone, etc.) and the AUX input (2) of the
speaker using the included 3.5 mm audio cable.
•
Set the volume on your terminal device to a low level.
•
Switch on the speakers as described in
4.1,
Switching the product on and off.
The status LED
(4) is now green.
•
Start and control audio playback on the connected
terminal device accordingly.
•
Turn the rotary control to the left or right to increase
or decrease the volume.
•
Press the function button (1) to mute the speaker.
Note
Please note that you cannot establish the
Bluetooth
®
connection described under 4.4 and 4.5 if an audio
cable is connected.
4.4
Bluetooth
®
pairing
Note
•
Check whether your mobile device (MP3 player,
mobile phone, etc.) is
Bluetooth
®
capable.
•
If not, you can only use the speaker for playback
using the included audio cable.
•
Note that the maximum range for
Bluetooth
®
is
10 metres without obstacles such as walls, people,
etc.
•
Make sure that your
Bluetooth
®
capable terminal
device is on and
Bluetooth
®
is activated.
•
Make sure that the speaker is located within the
Bluetooth
®
range of max. 10 metres.
•
Switch on the speakers as described in
4.1
Switching the product on and off.
•
The status LED (4) starts to flash in blue. The speaker
searches for a connection.
•
Open the
Bluetooth
®
settings on your terminal device
and wait until
Hama Soundchest
appears in the list
of
Bluetooth
®
devices found.
•
Select
Hama Soundchest
and wait until the speaker
is listed as connected in the
Bluetooth
®
settings on
your terminal device. An acoustic signal confirms that
connection was successful.
•
The status LED (4) now remains blue.
Note –
Bluetooth
®
password
•
Some terminal devices require a password in order
to connect to another
Bluetooth
®
device.
•
If your terminal device requests a password for
connection to the speaker, enter 0000.
Note
•
The speaker always stores the last eight terminal
devices paired.
•
The speaker will automatically connect to the last
terminal device paired when it is switched on the
next time.
