Hama SNAPDROP, Operating Instructions Manual

Page: 6 / 103

5
Note –
Bluetooth password
• Some terminal devices require a
password in order to connect to another
Bluetooth device.
• If your terminal device requests a
password for connection to the speaker,
enter 0000.
4.4 Automatic
Bluetooth connection
(after successful pairing)
• Make sure that your
Bluetooth capable
terminal device is on and
Bluetooth is
activated.
• Make sure that the speaker is located within
the
Bluetooth range of max. 10 metres.
• Switch on the speakers as described in 4.1
Switching the product on and off.
• After successful connection, the status LED
(8) will light up in blue. An acoustic signal
confirms that connection was successful.
Note – Connection impaired
• After the speaker and terminal device
have been paired, a connection is
established automatically. If the
Bluetooth connection is not established
automatically, check the following:
• Check the Bluetooth settings of your
terminal device to see whether Hama
Snapdrop is connected. If not, repeat
the steps listed under Bluetooth pairing.
4.5 Audio playback (via
Bluetooth)
Start and control audio playback on the
connected terminal device accordingly.
Alternatively, audio playback can also be
controlled on the speaker (if the connected
device supports this function).
• Press the >ІІ function button (4) to start or
pause audio playback.
• Briefly press the >> + function button (5) to
skip to the next track.
• Briefly press the << – function button (3) to
go back to the previous track.
• Hold down the >> + function button (5) to
increase the volume.
• Hold down the << – function button (3) to
reduce the volume.