17
CLOCK
— adjust the real time clock
TIMER
— set timer on and off time
BASS
— set BASS on or off
EQ
— set EQ mode (FLAT->JAZZ->POP -> ROCK ->CLASSIC)
ID3
— set ID3 display on or off
RECORD
— record to USB (REC USB) or to SD/MMC (REC CARD)
3. Press
MENU
button repeatedly until the desired setting shows up.
4. Press
ENTER
button to select the setting.
5. Press
TUNE+
or
TUNE-
to change the value.
6. Press
ENTER
button again to confi rm the setting.
•
Setting the Clock
1. Press
MENU
button repeatedly until „CLOCK” is shown.
2. Press
ENTER
button to enter clock setting mode.
3. The current clock will be shown with hour fl ashing.
4. Press or button to adjust the time by 1 hour. Hold it down to adjust continuously.
5. Press
ENTER
button to select the minute.
6. Press or button to adjust the time by 1 minute. Hold it down to adjust continuously.
7. Press
ENTER
button to fi nish the clock setting and exit clock setting mode.
•
Setting the Timer
1. Press
MENU
button repeatedly until „TIMER” is shown.
2. Press
ENTER
button to enter timer setting mode.
3. For on-time setting, press or button until „ON TIME” is shown.
4. Press
ENTER
button to enter on-time timer setting mode.
5. The current on-time setting will be shown with hour fl ashing.
6. Press or button to adjust the time by 1 hour. Hold it down to adjust continuously.
7. Press
ENTER
button to select the minute.
8. Press or button to adjust the time by 1 minute. Hold it down to adjust continuously.
9. Press
ENTER
button to fi nish the on-time setting and exit timer setting mode.
10. For off-time setting, press or button unit „OFF TIME” is shown.
11. Press
ENTER
button to enter off-time timer setting mode.
12. Repeat steps 5 to 9 for off time setting
•
Setting the EQ
1. Press
MENU
button repeatedly until
EQ
is shown.
2. Press
ENTER
button to enter EQ setting mode.
3. The current setting is shown. Press or button repeatedly until the desired setting is shown.
The settings will be shown in the order of FLAT->JAZZ->POP->ROCK->CLASSIC
4. Press
ENTER
button to confi rm and exit EQ setting mode.
5. The
EQ
icon will be lit on except it is set to
FLAT
.
•
Setting the Super Bass Effect
1. Press
MENU
button repeatedly until
BASS
is shown.
2. Press
ENTER
button to enter BASS setting mode.
3. The current setting is shown. Press or button until the desired setting is shown.
The settings will be shown in the order of „BASS ON -> BASS OFF.
4. Press
ENTER
button to confi rm and exit BASS setting mode.
5. The
BASS
icon will be turned on if BASS mode is set to
ON
.
