5
Weekday
•
To change the language in which the weekday
is displayed (5), press the
button (12) for 3
seconds. The current language will be displayed.
•
Hold down the
button (12) to change to the
other languages.
Note - Day of the week
You can choose German (
GE
), English (
EN
),
Italian (
IT
), Spanish (
SP
) or French (
FR
) for the
weekday display.
Setting the time zone
Note - Time zone
•
The DCF signal can be received over long
distances, but always transmits the current
Central European Time in Germany. Make sure
you account for the time difference in countries
with another time zone.
•
If you are in Moscow, the time is 3 hours
later than in Germany. This means that you
should set +3 for the time zone. The clock
then automatically sets the time to 3 hours
after the DCF signal received or relative to the
manually set time.
•
Press and hold the
▲
button (13) for approx.
3 seconds until the time zone symbol
F
is
displayed.
•
Press and hold the
MODE
button (11) for approx.
3 seconds to set the required time zone difference.
•
To select the individual values, press the
▲
button
(13) or the
button (12) and confirm each
selection by pressing the
MODE
button (11).
•
Press and hold the
▲
button (13) for 3 seconds
to switch the display between local and time
zone-shifted time.
Selecting 12 or 24-hour format
•
Press the
▲
button (13) to switch between the 12
and 24-hour formats.
5.3. Temperature display
•
Press the
°C/°F/WAVE
button (10) to choose
between °C and °F for the temperature display (8).
5.4. Alarm
Note - Alarm
The alarm time always depends on the time
displayed, that is, the local or time zone-shifted
time (
F
).
Setting the alarm time
•
Repeatedly press the
MODE
button (11) to access
alarm mode 1 (
ALM1
) or 2 (
ALM2
).
•
Press and hold the
MODE
button (11) to set the
alarm time (8) for the alarm displayed. The hours
display begins to flash.
•
Press the
▲
button (13) or the
button (12) to
select the hour for the alarm time and confirm your
selection by pressing the
MODE
button (11). The
minutes display begins to flash.
•
Repeat the process to set the minutes for the
alarm time.
•
Press the
MODE
button (11) repeatedly to also set
the other alarm mode or return to the temperature
display.
Activating/deactivating the alarm
•
Press the
ALARM
button (9) repeatedly to
activate/deactivate alarm 1 or alarm 2.
•
If an alarm is activated, the corresponding symbol
1
/
2
will be displayed.
Summary of Contents for RC200
Page 2: ...1 2 1 2 9 10 11 12 13 6 14 7 8 5 3 4...
Page 80: ...79 1 2 RC 200 2 3 4 4 1 14...
Page 86: ...85 1 2 RC 200 2 AAA 3...
Page 92: ...91 1 2 RC 200 2 AAA 3...
