![Hama MyVoice 600 Operating Instructions Manual Download Page 6](http://html1.mh-extra.com/html/hama/myvoice-600/myvoice-600_operating-instructions-manual_3531437006.webp)
5
•
Device on:
Press and hold the
multifunction button
(1) for
approximately 3 seconds until the
status LED
(3) begins to
alternate between red and blue and you hear a voice say, ‘Pairing’.
The headset is searching for a
Bluetooth
®
connection.
•
Open the
Bluetooth
®
settings on your terminal device and wait
until
MyVoice600
appears in the list of
Bluetooth
®
devices found.
•
Bluetooth
®
devices found.
•
Select
MyVoice600
and wait until the headset is listed as
connected in the
Bluetooth
®
settings on your terminal device.
Note –
Bluetooth
®
password
If your terminal device requests a password to establish the
connection, enter
0000
.
Note
If pairing was successful, the
status LED
(3) flashes blue slowly. A
voice says, ‘Connected’.
•
You can now use the headset.
5.2. Automatic
Bluetooth
®
connection
(after successful pairing)
Note
•
Make sure that your
Bluetooth
®
-capable terminal device is on
and
Bluetooth
®
is activated.
•
For more information, please refer to the operating instructions
of your terminal device.
•
Make sure that the headset is switched on.
•
After the headset and terminal device have been paired, a
connection is established automatically.
•
You can now use the headset.
Note
•
If pairing was successful, the
status LED
(3) flashes blue slowly.
A voice says, ‘Connected’.
•
It may be necessary to change the settings on your terminal
device to enable it to automatically connect to the paired
headset.