Installing the Hardware:
PS/2 model (Windows® 95/98/NT/ME/2000/XP):
1. Switch off your computer and connect the PS/2 connector of the mouse
to the PS/2 mouse port of your PC.
2. Switch your computer on again.
USB model: (Windows® 98SE/2000/ME/XP):
Connect the USB connector of the mouse to the PC's USB port or a USB
hub.
Depending on the Windows® version, you may be asked for drivers. If this
is the case, insert your Windows® installation CD in the CD-ROM drive.
Installing the Software:
Note:
Uninstall or delete your previous mouse driver before you start
installing the new software!
1.) Place the enclosed CD-ROM into the CD-ROMdrive of your laptop or PC.
2.) Click
Start -> Run
on your Windows® Desktop. Enter
x:/Setup.exe.
x
stands for the letter assigned to your CD-ROM / DVD drive. Now follow
the instructions on the screen.
3.) After installation, it may be necessary to restart your computer before
running the software.
Note:
When installing the software under Windows® XP, a message may
appear regarding an unsigned driver. This does not affect mouse or soft-
ware operation. Simply ignore and continue with the installation process.
L
L
Insturction Manual
5
00057265bda 09.02.2006 14:29 Uhr Seite 5
