5
5.2 Alarm clock
Alarm clock settings
• Briefly press the
Mode
button (B) to switch to Settings
mode (AL1, AL2, 2ndT). "AL1" appears first for alarm time
1 in the display. Press and hold the
Mode
button (B) for
around 2 seconds. The hour starts to flash. Now press
the
Up
or
Down
button to set the desired alarm time.
Confirm the selection by pressing the
Mode
button. Alarm
1 is now set.
• Pressing the
Mode
button again takes you to alarm
2. Repeat the steps described above to set the second
alarm time.
Activating/deactivating the alarm clock
• Briefly press the
Alarm clock
button (9) to activate or
deactivate the alarm times as follows. Alarm 1, Alarm
2, Alarm 1+2. Activated alarm times are indicated by a
corresponding alarm clock symbol (3) in the display.
6. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth
and do not use any harsh cleaners. Ensure that no water is
able to enter the product.
7. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Technical data
"Hvar" radio alarm clock
Power supply
Power supply unit or 3.0 V,
2 x AAA battery
9. Declaration of conformity
Hama GmbH & Co KG hereby declares that
the radio equipment type [00222206] is in
compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the
following Internet address:
https://uk.hama.com
00222206
Downloads
Frequency band(s)
77.5 kHz
Specifications according to Regulation (EU)
2019/1782
Brand name, commercial
register number, Address
Hama, HRA12159,
Dresdner Str. 9
86653 Monheim,
Germany
Model identifier
HX075-0501000-AG-001
Input voltage
100–240 V
Input AC frequency
50 / 60Hz
Output voltage
Output current
Output power
5.0 V DC / 1.0 A / 5.0 W
Average efficiency during
operation
73.6 %
Efficiency at low load
65.9 %
Power consumption at
zero load
0.10 W