12
•
Note that the maximum range
for
Bluetooth
®
is 10 metres
without obstacles such as walls,
people, etc.
•
Make sure that your
Bluetooth
®
capable terminal device is on and
Bluetooth
®
is activated.
•
Make sure that the speaker is located
within the
Bluetooth
®
range of max.
10 metres.
•
Switch on the speakers as described
in
4.2 Switching the product on
and off.
•
An acoustic signal will sound and
the function button
(3) will start
to flash in blue. The other function
buttons flash in red.
The speaker searches for a connection.
•
Open the
Bluetooth
®
settings on your
terminal device and wait until
Hama
Freeman X6
appears in the list of
Bluetooth
®
devices found.
•
Select
Hama Freeman X6
and
wait until the speaker is listed as
connected in the
Bluetooth
®
settings
on your terminal device. An acoustic
signal confirms that connection was
successful.
•
All function buttons (except for
(3)) light up constantly in red.
Note –
Bluetooth
®
password
•
Some terminal devices require a
password in order to connect to
another
Bluetooth
®
device.
•
If your terminal device requests
a password for connection to the
speaker, enter 0000.
5.2 Automatic
Bluetooth
®
connection (after successful
pairing)
•
Make sure that your
Bluetooth
®
capable terminal device is on and
Bluetooth
®
is activated.
•
Make sure that the speaker is located
within the
Bluetooth
®
range of max.
10 metres.
•
Switch on the speakers as described
in
4.2 Switching the product on
and off.
•
After automatic connection, all the
function buttons (except for
(3))
light up constantly in red. An acoustic
signal confirms that connection was
successful.
Note – Connection
impaired
•
After the speaker and terminal
device have been paired, a
connection is established
automatically. If the
Bluetooth
®
connection is not established
automatically, check the following:
•
Check the
Bluetooth
®
settings
of your terminal device to see
whether
Hama Freeman X6
is
connected. If not, repeat the steps
listed under
Bluetooth
®
pairing.
•
Check whether your terminal
device and the speaker are less
than 10 metres apart. If not, move
them closer together.
•
Check whether obstacles are
impairing the range. If so, move
the devices closer together.
•
Check whether the audio cable is
connected to the speaker. If so,
disconnect it.
5.3 Audio playback (via
Bluetooth
®
)
Start and control audio playback on the
connected terminal device accordingly.
Alternatively, audio playback can also
be controlled on the speaker (if the
connected device supports this function).
•
Press the
function button (4) to
start or pause audio playback.
•
Hold down the function button
(5)
to skip to the next track.
•
Hold down the function button
(6)
to go back to the previous track.
•
Briefly press the function button
(5) to increase the volume.
•
Briefly press the function button
(6) to reduce the volume.
