4
5
Operating instructions
g
To a wall outlet
AC Adapter
(supplied)
To DC IN 24V jack
To STEREO IN jack
Red LED
On/Off
White
LED
Volume adjust
UP/DOWN
Volume adjust
modulate the bass
modulate the treble
The front of host machine
1. the stand-by indicating light of the host
machine(bright when the power on )
2. the working indicating light of the host
machine(bright when starting up)
3. control acceptor window
The back of host machine
1. [UP DOWN] modulate the volume
2. [ON/OFF] open&close the host machine
3. DC IN 24V INPUT plug jack connect AC adapter
4. STEREO IN connect your sound resource
5. Contact surface, put on any solid surface
FD-500 full functional controller
1. [power]open or close the host machine
2. loudness off&on
3. modulate the volume
4. modulate the bass
5. modulate the treble
Warning
Read the manual carefully and check all product
items you received before use.
Take care not to place the product in extremely humid
atmosphere, avoid heavy vibration and falling down.
Gently take and place the transducer when in use.
Avoid hard pressing of the transducer
Make sure that the transducer contacts well to the
sounding media such as table surface to avoid sound
distortion or low volume.
Do not pull the plug when playing to avoid
possible damages to the internal electric circuit of
the amplifi er.
When playing in mild volume, a little temperature
rise on the surface of amplifi er is normal. But if the
temperature is too high, please tune down the volume
to protect your amplifi er.
SPECIFICATION :
Exact vibrating driver standard: B20
Power: 20w
Frequency response:100Hz-20Knz
Size: 60X60X50mm
Weight: 550g
DC IN 24V 2.5mm STEREO IN plug jack
AC adapter: 100-240V 50/60HZ
Sound resource : NOTEBOOK PC IPOD MP3 MD CD
For the safety use of the FD-500, please read the
instruction book before you use the FD-500, and make
sure look up the instruction book during using.
The FD-500 transfer the music signal to the vibration,
connect it to any music resource, then it can turn any
solid surface (wood, glass )into a speaker, the sound
effect will different from different material.
The FD-500 adopt the antimagnetic design , you can
use it anywhere.
Characteristic:
uptodate vibrating technology.
full functional remote contral,
bass and treble control,
stand-by volume memory,
loudness function,
metal shell.
USE THE FD-500
1. Connect the AC adapter to the FD-500.
Connect the AC adapter to the FD-500’s DC IN 24V
plug jack, then plug in the AC POWER.
2. Connect the Audio frequency connecting wire to
the FD-500 and the sound resource. Plug the small
end (2.5mm) to the STEREO IN of the FD-500,while
the bigger end plugged to your sound resource
(CD MP3 MD NOTEBOOK etc.)
3. Check the red light is bright or not when stand-by
4. Put FD-500 on any solid surface, (for example:
desk, tea table, wood shelf, you will fi nd the magic
vibration technology brings you special taste,
different material different sound effect)
5. The key Off and on about FD-500.
(red indicating light ture to white), push the key
ON/OFF softly, or use the POWER key on the
controller
6. The modulate of volume, the key UP, DOWN beside
the POWER key or the VOLUME key on the
controller.
7. You can modulate the BASS and TREBLE on the
controller .
