4
•
Move the
1 2 3
slide switch (26) to the left or
right to select the channel on which the measuring
station transmits. The display (20) shows
1,
2 or 3
.
•
Press the C/F button (25) to switch the temperature
display (21) between °C and °F.
•
Then close the battery compartment cover.
Note
Before use, ensure you insert the batteries in
the measuring station first and then in the
base station.
Base station
•
Remove the screen protector from the display.
•
Plug the power supply connection cable into the
socket (18) on the base station. Switch the base
station on by plugging the power supply unit
into a power outlet approved for this purpose.
The socket must be close to the base station and
easily accessible.
•
Alternatively, open the battery compartment and
remove the contact breaker. Close the battery
compartment cover (17).
Note
•
If the batteries are inserted correctly and you
connect the power supply unit to the station,
the base station will automatically switch to
the external power supply.
•
The 2 pieces of the leftmost AA batteries
on the main unit provides power to the
alarm clock,
indoor temp/ humidity, weather forecast &
wireless reception function.
•
The 3 pieces of the rightmost AA batteries
provides power to the motion sensor function
and the display backlight.
4.2. Replacing the batteries
Measuring station
•
When the
symbol appears, replace the
2 AAA batteries for the measuring station with
2 new ones.
•
Open the battery compartment (27), remove and
properly dispose of the depleted batteries, and
insert two new AAA batteries with the correct
polarity. Then close the battery compartment cover.
Base station
•
When the
symbol appears, replace the 2 AA
batteries on the left in the base device with new
ones. Then set the devices back up according to
the operating instructions.
•
When the range of the motion sensor diminishes
or the backlight gets dimmer, replace the 3 AA
batteries on the right in the base device with
new ones.
•
Open the battery compartment, remove and
properly dispose of the depleted batteries, and
insert five new AAA batteries with the correct
polarity. Then close the battery compartment
cover (17).
5. Installation
Note – Installation
•
We recommend initially placing the base and
measuring stations in the intended locations
without installing them and making all the
settings described in
6. Operation
– to do.
•
Only install the stations once the appropriate
settings have been made and a stable wireless
connection is established.