3
g
Package contents:
1x USB 2.0 hub
1x operating instructions
System requirements:
• Operating system Windows 2000 from SP 3,
XP from SP 1, Vista
• Free USB connection, preferably USB 2.0
Safety instructions:
You have acquired a high-quality, electronic accessory
for your computer which is universally useable. Please
observe the following points:
• Protect the device against pressure and impact.
• Do not expose the device to moisture. The precision
contacts can be damaged.
• To not connect the device if the device, the
connection lead or the mains adapter are damaged.
• The device or other components must only be
repaired in a specialist shop or in a service centre.
• Only use the enclosed original mains adapter or
original spare parts.
• Only use the enclosed USB connection cable without
extension. Otherwise, the data security can be
affected.
• Make sure that all connected devices are CE-marked.
• Avoid heat sources and direct sunlight exposure.
•
Attention!
Keep electrical equipment and electronic
devices out of reach of children.
•
Attention!
Keep packaging materials out of reach of
children! Danger of suffocation!
Putting into operation:
1. Switch on your PC and wait until it has started up.
Connect the USB hub with your PC/notebook by
means of the enclosed USB cable.
2. Please make sure that no terminal device is
connected when you install the USB hub.
Note:
When connecting and disconnecting the USB
hub and the USB devices, different messages can
appear on your screen. Contact a specialist or consult
the manual of your computer or operating system if
you have any questions.
3. Now you can connect your USB peripheral devices
(e.g. printer, scanner etc.) to the USB hub. When
installing the devices you have to install every devices
separately, i.e. please wait until the drivers of the
respective device have been completely installed
before installing another device.
4. It is also recommendable – as far as this is possible –
to supply the terminal devices which are connected to
the hub with power of their own.
Note:
When connecting the USB hub, you do not have
to install drivers (are included in the operating system
Windows 2000 from SP3, XP from SP1, Vista). A driver
may be necessary for the connected USB devices.
This one can be obtained from the manufacturer of
the respective device or when purchasing such a
device.
Class A information technology equipment
Warning! This device is categorized as class A
equipment. This equipment can cause radio
interference in living spaces. If this is the case, you
can request the operator to undertake appropriate
measures to prevent such interference.
User manual
2R021042bda.indd Abs2:3
2R021042bda.indd Abs2:3
08.10.2007 13:53:37 Uhr
08.10.2007 13:53:37 Uhr