23
HAMA_DP2_UM-20151116-EN
5 OPERATION
EN
7.
Unscrew the screw cover and remove the tip or nozzle.
8.
Depressurize the hose by turning the rotation direction button to “-1” or “Return” and
uncouple the hose from the machine.
9.
Put an orange sponge ball in the coupling of the nosepiece. Make sure that you use the
correct size.
10.
Connect the hose to the machine and turn the pump on at a low speed and pressure until
the orange sponge ball appears again at the end of the spraying tool (gun).
11.
Repeat this procedure with the orange sponge ball. The hose is now clean.
5.5.2.2
Cleaning the air gun
1.
Clean the nozzle, mixing chamber, screw cover and the screw thread of the mixing chamber
with a steel brush.
2.
Lubricate the screw thread of the mixing chamber.
5.5.2.3
Cleaning the airless gun
1.
Take all of the parts apart and rinse them off thoroughly.
2.
To prevent corrosion, all parts can be blown dry with compressed air.
5.5.2.4
Cleaning the couplings
Couplings must be cleaned with water. The fixed parts have rubber sealing rings. These
must be removed and rinsed clean with water. Then they can be replaced in the couplings
There must always be sealing rings in the couplings to prevent leaks.
ATTENTION
