16
Format
• Set 12/24 hour
Choose between 12 and 24 hours format.
• Set date format
Choose between the
DD-MM-YYYY
/ und
MM-DD-YYYY
date format.
11.2 Backlight
Manual settings
The backlight can be configured for each operating mode
(Operation mode, Standby mode) separately.
Proceed as follows:
2-3 sec.
[
MODE/MENU
]
Backlight
•
For the operation modes Operation mode (
Power on
)
and Standby mode (
Standby
), select between various
brightness levels.
•
When the radio is in standby, press [
] to
illuminate the display at the brightness level set for that
operation mode for ca. 10 seconds.
•
Move the
Auto Dimmer switch
on the back of the
radio to the
OFF
position to deactivate the sensor and to
activate the manual settings.
Automatic settings (Sensor)
With the sensor enabled, the backlight is automatically
adjusted to the environment and its brightness. In
complete darkness (for example, at night in the bedroom),
the backlight completely turns off.
•
Move the
Auto Dimmer switch
on the rear of the
radio to the
ON
position to activate the sensor and to
deactivate the manual settings.
•
When the radio is in standby, press [
] to
illuminate the display a for ca. 10 seconds.
11.3 Factory Reset
To reset the radio to the factory default settings, proceed
as follows:
2-3 sec.
[
MODE/MENU
]
Factory Reset
Confirm the following prompt with
Y
to reset the radio to
the factory default settings.
All settings made previously are deleted.
Note
•
Resetting to the factory default settings can solve
some problems and malfunctions.
•
However, all settings made previously, such as
favourites and station lists, are permanently deleted.
