4
5.1 General notes on use
5.1.1 Switch On / Off / Standby
•
Press [
POWER/VOLUME/ENTER/NAVIGATE
] (5) to
switch on the radio.
•
Press and hold [
POWER/VOLUME/ENTER/NAVIGATE
]
(5) for 3 seconds to switch the radio off (standby).
•
To completely switch off the device, disconnect it from the
power supply.
5.1.2 Navigation and control
•
After pressing a shortcut button, navigate through the
menu items using.
•
Select the individual menu items by turning [
POWER/
VOLUME/ENTER/NAVIGATE
] (5).
•
Confirm the selection by pressing [
POWER/VOLUME/
ENTER/NAVIGATE
] (5).
5.1.3 Volume adjustment
•
Turn the volume up (right) or down (left) by turning
[
POWER/VOLUME/ENTER/NAVIGATE
] (5) accordingly.
5.2 Switching on
Warning
•
Only operate the product from an approved socket that
is connected to the public power supply. The socket
must be installed close to the product and must be
easily accessible.
•
Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug the
power cord from the socket.
•
If using a multi-socket power strip, make sure that the
total power consumption of all connected devices does
not exceed the power strip's maximum throughput
rating.
•
If you will not be using the product for a prolonged
period, disconnect it from mains power.
•
Connect the mains cable to a properly installed and easily
accessible mains socket.
•
Wait until the radio has initialised fully.
•
Press [
POWER/VOLUME/ENTER/NAVIGATE
] (5) to
switch on the radio.
Note – switching on for the first time
•
The Setup Wizard starts up automatically when the
device is turned on for the first time.
•
At the initial start-up, the system interface will ask
about the preferred language. Select your preferred
language.
5.3 Language
To change radio's menu language, proceed as follows:
•
Press [ ] (1) to access the Settings menu.
•
Use [
POWER/VOLUME/ENTER/NAVIGATE
] (5) to
navigate to the "System Settings" menu item.
•
Confirm the selection by pressing [
POWER/VOLUME/
ENTER/NAVIGATE
] (5).
•
Use [
POWER/VOLUME/ENTER/NAVIGATE
] (5) to
navigate to the "Language" menu item. Confirm the
selection by pressing [
POWER/VOLUME/ENTER/
NAVIGATE
] (5).
•
Use [
POWER/VOLUME/ENTER/NAVIGATE
] (5) to select
your preferred system language.
•
The language setting currently selected is marked with an
asterisk (*).
Note
•
The following languages are available:Czech, English,
Danish, Dutch, German, Finnish, French, Italian,
Norwegian, Polish, Portuguese, Slovak, Spanish,
Swedish and Turkish
6. Care and maintenance
Note
Disconnect the device from the mains before cleaning
and during prolonged periods of non-use.
•
Only clean this product using a lint-free, slightly damp
cloth and do not use any harsh cleaners.
•
If you do not plan to use the product for a prolonged
period, turn off the device and disconnect it from the
power supply. Store it in a clean, dry place away from
direct sunlight.
7. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
