This power supply unit was especially developed for typical camera voltages. The wide range
input of 100-240V 50/60Hz allows you to use it all over the world. Depending on the continent
and country a travel adapter may also need to be used to ensure a proper connection to the
country-specific power socket.
The power supply unit is a stabilized version. This means, the set output voltage is not excee-
ded even if the charge is low. Before commissioning for the first time, ensure that the maximal
output current of the Digi 2.5 is not exceeded.
1. Select the matching plug from the universal plugs and check that the power supply unit
socket securely fits your camera. The universal plug can only be changed in one direction.
(Thicker and thinner pin connection). Ensure that the + (positive) polarity is always on the
inner contact of the power supply unit plug and cannot be changed!
2. Select the required output voltage for your camera according to the operating manual or
the marking on the DC socket (power supply unit socket). The incorrect voltage or polarity
setting can lead to damages to your camera! If in doubt, contact the camera manufacturer
or your specialised dealer.
3. Only plug the power supply unit plug into your camera when the camera is switched off!
4. First plug the Digi 2.5 in the power socket and then switch the camera on.
Safety instructions:
• The mains adapter must only be operated from a mains socket. Do not connect the
mains adapter to extension cables, table socket outlets or other adapters.
• Protect the mains adapter from dirt, moisture and overheating, and only use it in dry rooms!
• Do not open the mains adapter, nor should it be operated if it is damaged
• The mains adapter must only be repaired by a competent specialist.
• The mains adapter must only be cleaned with a dry soft cloth.
• Always disconnect from the mains prior to cleaning, repair or if it is not going to be used for
a prolonged period.
• Warning! The mains adapter, just as for all electrical appliances, must be kept away from
children!
The DC-in universal plug must never be inserted into a 100 - 240 V socket.
L
Operating instructions »Digi 2.5«
output voltage (V)/
Ausgangsspannung
3.3
4.2
5.0
6.5
7.0
7.8
8.4
max. ouput current/
2500
2000
1700
max. Ausgangsstrom
mA
mA
mA
5 DC plugs/-Stecker:
0.75 x 2.4/1.4 x 3.5/1.7 x 4.0/1.7 x 4.75/2.1 x 5.5 mm
+ 2 Sony plugs/-Stecker
