9
GB
5.3 Inserting or changing the battery
•
Open the battery compartment of the remote control
•
Insert a type CR2025 button cell battery, observing polarity.
•
Remove the contact breaker strip from the battery if present.
•
Close the battery compartment. Make sure that the cover closes easily and tightly.
1
2
5.4 Connecting the power supply
Warning
•
Only connect the product to a socket that has been approved for the device. The socket
must be installed close to the product and easily accessible.
•
Do not continue to operate the device if it becomes visibly damaged. (This is mandatory for
all products with 220 V mains connections.)
Note
•
The power supply unit is suitable for mains voltages of 100–240 V and therefore can be
used worldwide. Please note that a country-specific adapter may be necessary.
•
You can find a selection of compatible Hama products at www.hama.com.
•
Connect the enclosed power supply unit to a properly installed socket.
•
Then connect the lead of the power supply unit to the DC In of the device.
Summary of Contents for 95291
Page 49: ...50 D...
Page 217: ...218 CZ...
