background image

4

2. Confi guring the operating system and computer

The TCP/IP protocol must be installed on all PCs that will be using the Internet. By default, the IP address 192.168.2.1 and an activated 
DHCP server are confi gured for the router. This means that the connected PCs are automatically given appropriate addresses and 
other settings. We recommend using these settings.

Proceed as follows to check the settings on your PC:
Start -> Settings -> Control panel -> Network connections 
Select the connection (network adapter) via which your PC is connected 
to the router, e.g. “LAN connection”. When you right-click the correspon-
ding connection, a menu is displayed in which you select Properties.

Select the 

Internet Protocol (TCP/IP)

 entry in the list and click 

Properties

.

Select 

Optain an

 

IP address automatically

 and 

Optain DNS server 

address automatically

! Confi rm by clicking 

OK

, and again in the 

subsequent window.

Your PC is now confi gured such that the router assigns the IP address 
automatically. You can then confi gure the router using the web browser.
The browser must be Java-capable and the Java function must be activa-
ted (e.g. Internet Explorer 6.0 or better, or Mozilla Firefox).

Summary of Contents for 62763















Reviews: