g
Operating Instruction
9
Installation on Mac OS X 10.3.x or higher
Because Mac OS X 10.3.x or higher alrea-
dy includes the necessary drivers, you do
not need to install any drivers separately.
After you have inserted the card into
your MAC and restarted MAC OS X, the
computer recognizes and installs the card
after a short time.
You can check whether the controller was
installed properly by using the
System
Profi ler
program. The following entries
should appear in the USB section.
USB device tree
• USB high-speed bus
• USB bus
Contact and Support Information
If the product is defective:
Please contact your dealer or Hama
Product Consulting if you have any
product claims.
Internet/World Wide Web
Product support, new drivers and product
information are available at
www.hama.com.
Support hotline – Hama Product
Consulting:
Tel. +49 (0) 9091 502 115
Fax +49 (0) 9091 502 272
E-mail: [email protected]
00062755bda.indd Abs1:9
00062755bda.indd Abs1:9
27.07.2007 11:38:42 Uhr
27.07.2007 11:38:42 Uhr
