8
9
2. Un-installation
To remove the software from your hard disk under Windows
®
98/2000/ME/XP, click the “Start” menu, select “Programs”, and move to
“Wheel Mouse”, then click the “Uninstall icon”.
3. Memory Card Installation
a. Press the cover switch on the mouse bottom with thumb and slide the
cover out of the slot with forefinger in order to remove the cover of the
memory card reader/writer.
Mouse Drive CF USB
The attached CD-ROM contains user manual both in MS Word and HTML
format, please refer to “Readme” folder.
1. Installation
For Windows
®
98 O/S
Please DO NOT plug the mouse into USB port before installing the driver
a. Click on "SETUP" from the CD-ROM to start the installation.
b. Follow the instructions on the screen.
c. Continue the instructions on the screen, RESTART the PC when the
installation is completed.
d. After restarting the computer, the system will ask you to insert original
Windows 98
®
CD-ROM. Please insert it and point on proper location. For
LAN user, please point on the location of Windows folder (e.g. D:/Windows).
e. Once the installation is completed, please plug the mouse into the USB
port, then the mouse is ready to use.
For Windows
®
2000/XP/ME O/S
a. Plug the mouse to an available USB port, Windows
®
immediately recogni-
zes that a new USB device has been installed.
b. Driver is not necessary in Windows
®
2000/XP/ME, but if users want to use
programmable buttons, the driver must be installed.
L
L
MouseDrive CF USB
Press the Card
Reader Cover Switch
Slide the Cover
out of the Slot
00056986bda 25.09.2002 11:47 Uhr Seite 8
