3
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a safe
place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• USB Notebook lock
• These operating instructions
3. Safety notes
Warning
Run the cable of the Notebook lock so that it does not pose
a tripping hazard or block emergency exits.
4. Setting the combination number
Note
The combination is factory-set to ‚0000‘
• Push the cable into the lock with a valid combination (Pic. 1)
and rotate the cable clockwise by 45° until the cable locks
into place.
• Using the numbered wheels, enter your new, personalised
combination.
• Release the cable by rotating it anti-clockwise in order to save
the new combination.
Note
• We expressly recommend writing the new combination
down and storing it in a safe place.
• We accept no liability for any damages resulting from lost
or forgotten combinations.
5. Connection and locking of Notebook lock
• Attach the cable to a fixed object, e.g. foot of a table,
cupboard.
• Hold down the button on the lock.
• Plug the lock into the USB port on the device you
want to secure.
• Then release the button.
• Adjust the combination number.
6. Open the Notebook lock
• Enter the correct combination number.
• Press the button.
• Pull the lock out of the USB port.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
G
Operating instruction
