5
Inserting a PC card in the PCI – PC Card
card:
Note: For some PC card/PCMCIA products it
is possible that the corresponding software
and the driver will need to be installed before
the card is inserted. For further informa-
tion, consult your PC card/PCMCIA card
handbook.
Start your PC. Once Windows has started,
you can insert the PC card/PCMCIA card into
a free slot on the back of your PC. After it has
been inserted, Windows should automatically
recognise the card and continue with the
driver installation. Once all drivers have been
installed, the LEDs on the rear of the card will
display the PC card/PCMCIA card’s operating
voltage.
Red: 5V
Green: 3.3V
Removing a PC card from the PCI – PC Card
card:
Click on the “Remove Hardware Safely“
symbol in the Information section/ system
tray located in the bottom right-hand corner
of your desktop. Select the corresponding
PC card/PCMCIA card and click => Finish.
Press the eject lever on the rear of the card
and remove the PC card / PCMCIA card from
the slot.
Support and contact information
If products are defective:
Please contact your dealer or Hama Product
Consulting if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product
information can be found at www.hama.com
Support Hotline – Hama Product Consulting:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
E-mail: [email protected]
Safety instructions
• The device is suitable for indoor use only,
not for outdoor use.
• Do not open the device casing.
• Keep the device away from sources of heat.
• Do not operate the device in damp or dusty
environments.
00049250bda.indd Abs1:5
00049250bda.indd Abs1:5
27.07.2007 12:04:28 Uhr
27.07.2007 12:04:28 Uhr
