23
22
Hardware Setup
Installing the USB Card Reader to your system is easy. After completing
device driver installation and restarting your system, simply plug your USB
Card Reader into available USB port on your Macintosh computer, then the
system will do the installation. Now you may enjoy the ease of use and
high access speed of the USB Card Reader on your Macintosh.
Using the Reader
Showing a disk icon on desktop:
Insert your USB Card Reader into the USB port on Mac, then insert your
flash card into the slot on the USB Card Reader, a disk icon will appear on
desktop representing the card.
Accessing files or folders to the disk:
You can drag'n drop files or folders from/to the disk just like you do to
system HD or other Macintosh storage devices.
WARNING!
Remember to drag the disk icon representing the storage card to the trash
box before extracting the card from the reader or unplugging the reader unit
from USB port.
Uninstall Software
Should you feel necessary to remove the installed software and driver files
of your USB Card Reader, please refer to following instructions.
1. Unplug the Reader from USB port.
2. Click Start, and then click Programs.
3. On the pop-up menu, click on Uninstall USB Reader.
4. A dialog box appears asking for your confirmation. Click Yes to continue.
5. Software and driver files of your USB Card Reader will be removed auto
matically.
After removing software and driver files, you'll need to perform and before
using your USB Card Reader again.
Setup for Mac OS
Software Setup
Install device driver according to following instructions:
1. Insert the Setup Disc into the CD-ROM drive of your Macintosh
computer.
2. Double-click the CD-ROM icon on the desktop, and then run the USB
Reader Installer application, the content of Read Me appears. Click on
Continue to proceed. You can also find this file in the Setup Disc if you
want to view it later on.
3. The Installer Dialog appears. Select USB Reader Installer in the pop-up
menu and then click on the Install button to install the device driver.
4. A warning dialog will appear on the screen telling you that you should
quit all running applications before installation.
5. Click Continue button to start copying files. Click Cancel button if you
want to quit other running applications first.
6. After files copying is completed, the Restart dialog appears. Click Restart
button to restart the system or click Quit button to exit the installer.
