background image

10. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper

installation/mounting, improper use of the product or from failure to observe the operating instructions and/or

safety notes.

11. Service and support

Please contact Hama Product Consulting if you have any questions about this product.

Hotline: +49 9091 502-0 (German/English)

Further support information can be found here: www.hama.com

12. Warranty conditions

For this product, HAMA GmbH & Co KG grants you an extended manufacturer's warranty for freedom from

defects, usability, workmanship and the durability of the materials used for a period of 10 years. Excluded from

the guarantee is the compatibility of the product with future standards of further developed hardware.

Within the specified period, Hama GmbH & Co KG will remedy a justified warranty claim at its own discretion,

free of charge, either by repair or replacement.

The warranty period begins on the date of purchase of this product and is valid throughout the EU.

The warranty granted is in addition to and does not affect your statutory rights. Damage caused by improper

use, normal wear and tear, exposure to chemicals or force majeure, as well as tampering or repairs by you or

third parties, are excluded from the warranty.

Furthermore, accessories that are not part of the basic equipment of the product (promotional parts) are

excluded from the warranty.

In the event of a warranty claim, please contact us at Hama GmbH & Co KG, Dresdner Str. 9, 86653 Monheim,

Germany, enclosing proof of purchase. You are also welcome to contact us at www.hama.de or by phone on

+49 (0)9091/502-0.

Summary of Contents for 220826

















Reviews: