4. Safety instructions
Warning
•
Given the multitude of terminal devices and wall structures available on the market, the supplied mounting
kit is unable to cover every option.
•
It occasionally happens that the screws for attaching the device to the bracket are too long.
•
Please note that the supplied wall plugs are for use with solid, hollow and board construction materials
only.
•
Read the operating instructions for your terminal device before attempting to mount it. The instructions
provide information about the type and measurements of suitable fastening materials.
•
If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device,
purchase these from a specialised dealer.
•
Never apply force during assembly. This can damage your device or the holder.
•
If in doubt, have this product installed by a qualified technician - do not attempt to install it yourself!
•
Do not mount the product above locations where persons might sit or stand.
•
Once you have mounted the product and the attached load, check that they are sufficiently secure and safe
to use.
•
You should repeat this check at regular intervals (at least every three months).
•
Ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding
the maximum permitted dimensions is attached.
•
Make sure that the product is loaded symmetrically.
•
Maintain the necessary safety clearance around the attached load (depending on the model).
•
In the event of damage to the product, remove the attached load and stop using the product.
•
Do not attach any additional objects to the product.
5. Application and specifications
•
The bracket is used for mounting flat screens in private, non-commercial households.
•
The bracket is intended only for use inside buildings.
•
Use the bracket only for the intended purpose.