Hama 137253, Operating Instructions Manual

Page: 3 / 36

3
5. Connection
Warning
• Only operate the product from a socket that has been
approved for the device. The socket must be installed close
to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/
Off switch – if this is not available, unplug the power cord
from the socket.
• If using a multi-socket power strip, make sure that the total
power consumption of all connected devices does not exceed
the power strip's maximum throughput rating.
• If you will not be using the product for a prolonged period,
disconnect it from mains power.
All devices must be switched off before devices can be connected.
The overvoltage protector may be connected only between the
electrical consumer and an earthed socket. In the operational state,
the indicator light for the overvoltage protector lights up.
Warning
If the indicator light is not lit after switching on, the overvoltage
protector is defective – it may no longer be used and must be
exchanged for a new overvoltage protector.
6. Care and Maintenance
Note
Disconnect the device from the power supply before cleaning it
or if it is not going to be used for a long period of time.
• Only clean this product with a slightly damp, lint-free cloth and
do not use aggressive cleaning agents.
• Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
8. Insurance cover of 20 million euros
Our product liability insurance provides cover of up to 20 million
euros for personal injury and damage to property. The prerequisites
are proper product use (please note the safety information) and
proof that the damage is attributable to non-compliance with the
described protective function (please see the technical specifications
on the type plate and in these operating instructions).
9. Technical Data
Overvoltage
protection
Up: L-N=1,5kV; L/N-PE=2,0kV
Uc: 255V~ 50Hz
Uoc: L-N=5,0kV; L/N-PE=6,0KV;
Type III / T3
Total
leakage current
18.000 A (3 x 6.000A)
Cable length 2 m
Mains supply 220-240 V / 50-60 Hz / 16 A
Cable cross-
sectional area
1.5 mm 2
Connected load max. 3680 W
10. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of
with household waste. Consumers are obliged by law
to return electrical and electronic devices as well as batteries at the
end of their service lives to the public collecting points set up for
this purpose or point of sale. Details to this are defined by the
national law of the respective country. This symbol on the product,
the instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the materials or
other forms of utilising old devices/Batteries, you are making an
important contribution to protecting our environment.