background image

Controls:

1) Volume control
2) Bass control
3) Power switch
4) Operating signal
5) Connection for left front speaker
6) Connection for right front speaker
7) Connection for left rear speaker
8) Connection for right rear speaker
9) Connection for centre speaker

10) Connection for 5.1 sound source
11) Power cable

Connecting the speakers:

• Connect the five satellites with their connecting

cables to the subwoofer's outputs identified by AUDIO
OUTPUT.

• Connect the SoundSystem with the supplied cable to

the corresponding sound source via the subwoofer's
outputs identified by AUDIO INPUT.

• Then connect the SoundSystem to the power supply.

Set the switch on the back of the subwoofer to ON.

• The system is now ready for use!
• The controls at the front are used to control the volu-

me of the entire system and of the individual satellites.

• The bass tone is separately controlled by a control on

the front of the subwoofer.

Remedying faults:
Fault

Possible Cause

No function

• Speaker not switched on
• Speaker set at null
• Speaker not correctly 

connected

• No mains socket power
• Incorrect software setting

Distorted sound

• Volume setting too high

Safety instructions

Please observe the safety remarks in the operating
instructions for the PC!

• The speakers should only be transported in their

original packaging, or in other suitable packaging
which protects them from jolts and knocks.

• Condensation can arise when speakers are tran

ferred from a cold environment into a warm room.
Allow the speakers to climatise to the ambient
temperature, and ensure that they are absolutely dry,
before they are used.

• Ensure that the local mains voltage is 230 V/50 Hz.
• Ensure that the mains socket is freely accessible.
• The speakers’ ON/OFF switch does NOT disconnect

the speakers from the mains!
The mains plug has to be withdrawn from the mains
socket to disconect the speakers.

• Do not use the speakers in moist rooms.

• Conduct the cables in such a manner that they cannot

become a hazard (tripping) or be damged.
Observe the corresponding remarks in the instructions
when connecting the speakers.

• Ensure that no objects (e.g. metal paper clips, etc.)

or liquids can enter the interior of the speakers
(electric shock, short circuit).

• Immediately switch off the speakers and disconnect them

from the mains in emergencies (e.g. damage to speaker
case, controls or power supply line, or in the event of
foreign bodies or liquids entering the speakers).

• Any repair work must be carried out only by qualified

and authorized technicians.

• Always switch off the speakers and disconnect them

from the mains before cleaning them.
The speaker case surface should be cleaned with a
dry cloth.
Grime can be removed with a moist cloth that has been
dipped into water with a mild detergent and then
thoroughly wrung out.

Technical data:

Power supply:

230 V / 50 Hz

P.M.P.O:

800 watt

Frequency response:

80 Hz - 18 kHz

Dimensions and weight:

Dimensions of the speakers:
W/H/D

8 x 8 x 10.5 cm

Dimensions of the subwoofer:
W/H/D

16.5 x 25.5 x 35 cm

Guarantee conditions:

Hama products are of highest quality and are tested
according to the strict and international quality norms.
The guarantee starts from the date of purchase.
The guarantee is exclusively valid for defective material
and faulty manufacture and is limited to the pure value
of product, not due to damages, etc.
The guarantee claim must be asserted under presenta-
tion of purchase invoice and a short description of the
defect. The unit is carefully packed and has to be sent
portage- and freight free. The guarantee period  will not
be extended,  a new one will not be granted for this pro-
duct.

L

00011064bda  11.05.2005  11:40 Uhr  Seite 5

Reviews: